Hydraulic Submersible Pumps

Gulf Atlantic Pump & Dredge, LLC manufactures hydraulic submersible pumps ranging in size from 3" to 16" diameter discharge, with flows of 800 GPM to 10,000 GPM and total dynamic head (TDH) of 20-120 feet. Our line of pumps are known as low pressure, medium head, high volume pumps. The ability of our pumps to handle very heavy solids are the key to the GAPD line of hydraulic submersible pumps. Our customers state, "When no other pump can handle the job, the "old" H&H line of pumps are the pumps to count on."

GAPD offers cast pumps from 3" to 8" discharge diameter, and fabricated pumps 4" to 16" discharge diameter. All other pumps manufactured by GAPD are fabricated pumps making our pumps some of the most light weight pumps in the marketplace, resulting in easier deployment and relocation.  Our fabricated pumps ranging from 4" to 16" can be outfitted with either grease or oil lubricated bearing blocks, as well as a standard (five vein impeller, for moving lighter materials), or our three vane semi-opened face (ragball impeller) for moving heavier materials and solids. Weld hardened impellers and pump cases are available upon request as well as our dredge ragball impeller for use on our maintenance class dredge line.

Submersible Pump Line

    Hydraulic submersible pump, please click on button for specification sheet.

                                                     Hydraulic Motor Options:  M30-125, M30-10,M30-75

                    

       Bearing Block: Grease

       Discharge: 3" horizontal with 2 bolt "A" Flange

       TDH: 78' Maximum Production 900 GPM

       Pump and impeller are cast using a 3 vein open faced

       Options Include: various suction & discharge adaptors, rock guard.

       Hydraulic Oil Requirements: 9.5 - 22 GPM depending on hydraulic

                                                                motor selected

        Hydraulic Submersible Pump. please click on button for specification sheet.

                                                    Hydraulic Motor Options:  M30-20, M30-15, M30-125, M30-10

                    

       Bearing Block: Grease or Oil Lubricated

       Discharge: 4" vertical discharge with MPT fitting

       TDH: 7-115' Maximum Production 950-1100 GPM

       Pump and Impeller are fabricated using AR360 steel, also available in 316 SS

       Options Include: various suction & discharge adaptors, rock guard.

                         Ragball, standard water, or dredge ragball impellers are available

                                                   Hydraulic Oil Requirements: 21-41 GPM @ 2000 PSI depending on

                                                                       hydraulic motor selected

        Hydraulic Submersible Pump. please click on button for specification sheet.

                                                    Hydraulic Motor Options:  M30-20, M30-15, M30-125, M30-10

       Bearing Block: Grease or Oil Lubricated

       Discharge: 6" vertical discharge with MPT fitting

       TDH: 47'-95' Maximum Production 1400-2200 GPM

       Pump and Impeller are fabricated using AR360 steel, also available in 316 SS

       Options Include: various suction & discharge adaptors, rock guard.

                              Ragball, standard water, or dredge ragball impellers are available

                                                     Hydraulic Oil Requirements: 20-54 GPM @2000 PSI depending on

                                                                            hydraulic motor selected

        Hydraulic Submersible Pump. please click on button for specification sheet.

                                                    Hydraulic Motor Options:  M7600 3.0, M7600 4.0, M7600 5.0, M7600 6.0

       Bearing Block: Grease or Oil Lubricated

       Discharge: 8" vertical discharge with MPT fitting

       TDH: 43-85' Maximum Production 4000 GPM @ 15'

       Pump and Impeller are fabricated using AR360 steel

       Options Include: various suction & discharge adaptors, rock guard.

                              Ragball, standard water, or dredge ragball impellers

                                                     Hydraulic Oil Requirements: 40-112 GPM @ 2000 PSI depending on

                                                                            hydraulic motor selected

        Hydraulic Submersible Pump. please click on button for specification sheet.

                                                    Hydraulic Motor Options: M7600-30, M7600-40, M7600-50, M7600-60

       Bearing Block: Grease or Oil Lubricated

       Discharge: 10" vertical discharge with MPT fitting

       TDH: 43 to 85' Maximum Production 5000 GPM

       Pump and Impeller are fabricated using AR360 steel

       Options Include: various suction & discharge adaptors, rock guard.

                              Ragball, standard water, or dredge ragball impellers are available

                                                     Hydraulic Oil Requirements: 40-132 GPM @ 2000 PSI depending on

                                                                            hydraulic motor selected

        Hydraulic Submersible Pump. please click on button for specification sheet.

                                                    Hydraulic Motor Options:M7600-30, M7600-40, M7600-50, M7600-60

       Bearing Block: Grease or Oil Lubricated

       Discharge: 12" vertical discharge with MPT fitting

       TDH: 45-100' Maximum Production 5000 GPM

       Pump and Impeller are fabricated using AR360 steel

       Options Include: various suction & discharge adaptors, rock guard.

                              Ragball, standard water, or dredge ragball impellers ara available

                                                     Hydraulic Oil Requirements: 40-132 GPM @ 2000 PSI depending on

                                                                           hydraulic motor selected

        Hydraulic Submersible Pump. please click on button for specification sheet.

                                                   Hydraulic Motor Options:M7600-30, M7600-40, M7600-50, M7600-60

       Bearing Block: Grease or Oil Lubricated

       Discharge: 12" vertical discharge with MPT fitting

       TDH: 40' Maximum Production 6500 GPM

       Pump and Impeller are fabricated using AR360 steel

       Options Include: various suction & discharge adaptors, rock guard.

                              Ragball, standard water, or dredge ragball impellers are available

                                                     Hydraulic Oil Requirements: 40-132 GPM @ 2000 PSI depending on

                                                                            hydraulic motor selected

 

Slurry Gate Pump Line

        Hydraulic Submersible Pump. please click on button for specification sheet.

                                                    Hydraulic Motor Options:  M30-20, M30-15, M30-125, M30-10

       Bearing Block: Grease or Oil Lubricated

       Discharge: 4" vertical discharge with MPT fitting

       TDH: 7-115' Maximum Production 1100 GPM

       Pump and Impeller are fabricated using AR360 steel

       Options Include: various suction & discharge adaptors, rock guard.

                              Ragball, standard water, or dredge ragball impellers are available

                                                     Hydraulic Oil Requirements: 21-41 GPM @ 20000 PSI depending on

                                                                            hydraulic motor selected

        Hydraulic Submersible Pump. please click on button for specification sheet.

                                                    Hydraulic Motor Options:  M30-20, M30-15, M30-125, M30-10

       Bearing Block: Grease or Oil Lubricated

       Discharge: 6" vertical discharge with MPT fitting

       TDH: 47-95' Maximum Production 1400-2200 GPM

       Pump and Impeller are fabricated using AR360 steel

       Options Include: various suction & discharge adaptors, rock guard.

                              Ragball, standard water, or dredge ragball impellers are available

                                                     Hydraulic Oil Requirements: 20-54 GPM @ 2000 PSI depending on

                                                                            hydraulic motor selected

        Hydraulic Submersible Pump. please click on button for specification sheet.

                                                    Hydraulic Motor Options:M7600-30, M7600-40, M7600-50, M7600-60

       Bearing Block: Grease or Oil Lubricated

       Discharge: 8" vertical discharge with MPT fitting

       TDH: 43-85' Maximum Production 4000 GPM

       Pump and Impeller are fabricated using AR360 steel

       Options Include: various suction & discharge adaptors, rock guard.

                              Ragball, standard water, or dredge ragball impellers are available

                                                     Hydraulic Oil Requirements:40-112 GPM @ 2000 PSI depending on

                                                                            hydraulic motor selected

Randy Carter, Managing Director
Copyright © 2001 Gulf Atlantic Pump & Dredge, LLC. All rights reserved.
Revised: November 12, 2004 .